3-Rollers / Big Forces

- tiny forces - - big forces - - function -

the measuring station - 3 R 100 B 500 / 1000

   


 

Measuring ranges:
15N-250N, 25N-500N, 50N-1000N,
75N-1500N, 150-3000N,

With integrated measuring amplifier.

Zero-point adjustment (tare)
and amplification (calibration).

Analog output signal:0-10V or 4mA-20mA

 

Data sheet:

Datasheet 3R 100 B500 (Download)

The measuring station 3 R 100 B 500 / 1000 is designed for tensile force measuring of thin rigid material with high tensile forces. Thin rigid material needs a sufficiently sized measuring head for reliable measurement of a range of 5 - 100% of the maximum tensile force with high measuring accuracy.

Applied for tensile force measuring of steel wire, copper wire, glass fiber bars and other material of similar toughness, for material diameter up to 6 mm.
 

extremely large measuring range - Quatt Range

   


 

Measuring ranges are set by relocation of the measuring roller:
0-50N, 0-100N, 0-200N, 0-500N,
0- 100N, 0-200N, 0-400N, 0-1000N

With integrated measuring amplifier.

Analog output signal:
0-10V or 4mA-20mA

 

Zero-point adjustment (tare)
and amplification.

 

Data sheet:

Datasheet Quatt Range (Download)

Tensile force measuring of wire, yarn, ribbon, strips etc., for installation in production line, also for laboratory use, optimal for ONLINE measurements, very flat design, guiding rollers are adjusted to the material. Data logging independent from lever arm, also in case of broad guide rollers.  
     

for thick materials - 3 R 50 A

   


  Measuring ranges:
30N-610N, 60N-1220N,
120N-2440N, 180N-3660N,
240N-4880N, 305N-6100N

With integrated measuring amplifier.
Zero-point adjustment (tare)
and amplification (calibration)

Analog output signal:
0-10V or 4mA-20mA

 

Data sheet:

Datasheet 3R 50A (Download)

A complete measuring device: Sensor, measuring amplifier and display device in one housing. Very slender design and space-saving. For tensile force measuring of: thin wire, strands, fiber optics and textile material. Option: Equipped with cylindrical guiding rollers, suitable for measuring narrow tapes. For installation in machines.  

for thick materials - 3 R 50 B

   


  Measuring ranges:
7N-144N, 14N-288N, 28N-571N,
43N-857N, 57N-1142N,
With integrated measuring amplifier.

Zero-point adjustment (tare)
and amplification (calibration)

Analog output signal:
0-10V or 4mA-20mA

 

Data sheet:

Datasheet 3R 50B (Download)

A complete measuring device: Sensor, measuring amplifier and display device in one housing. Very slender design and space-saving. For tensile force measuring of: thin wire, strands, fiber optics and textile material. Option: Equipped with cylindrical guiding rollers, suitable for measuring narrow tapes. For installation in machines.  

### - 2 R 80 Derken

   
 

Nominal loads are depending on the built-in radial - force measuring head for built-in the series M 1100 - 20 and M 1100 - 6 are available

smallest measuring - range - up to 100 N
biggest measuring - range - up to 2000 N

Vertical-shifting: run-in of the material up to run-out of the material approx. 80 mm

Roller-material:  aluminium-alloy AlCuMgPb Option: ceramic coated rollers

Mounting: the mounting plate contains 6 fixing-threads M 8

Technical data: see data-sheets of the radial - force - sensors series
M 1300 - 20 or M 1100 - 6

Accessories available: Tensometric tripod with ground-fixing-holes

Data sheet:

Data sheet 2 R 80 (Download)

The tensile - force measuring - station 2 R 80 is a space-saving solution for precise measurement of cables, wires, tirecord and other flexible material.

It is equiped with one guiding-roller and one measuring roller. The measuring-roller run on the radial-force-sensor. Both are mounted on a solid plate.

The measuring-station is used, where the angle of contact of the material which is measured, around the measuring-roller, ( where the material run out of the measuring-station ) can be kept constant.

 

Application:  measuring tensile forces on: cables, ropes, wires, tirecord and other flexible material

Characteristics space - saving 2 - roller - system

 

robust - LC 1322

   
 

Measuring ranges:
0-50N, 0-100N, 0-200N, 0-300N,
0- 500N, 0-1000N

With built-in measuring amplifier.

Zero point setting (calibration)
and amplification.

Analog output signal: 0-10V or 4mA-20mA

 

Data sheet:

Datasheet LC1322 (Download)
Tensile force measuring of wires, strands, yarns, ribbons etc. for installing in production line, also for laboratory use, optimal for ONLINE measurements, very flat design, guiding rollers adjusted to the material to be measured and guiding roller spacing from 100 mm till 500 mm, measuring value logging independent from lever arm, also in case of wide guiding rollers.