Handheld

Small and easily managed these electronic tensile force measuring instruments are always ready, and are indispensible for short-time measurements. The characteristic feature of our measuring devices is the easy threading of current material. The display damping can be activated and provides a stable and smooth display when tensile forces are fluctuating. So a direct reading of the measured tensile force is guaranteed.

HANDY-TENS

Electronic tensile force measuring device. Application: textile yarns and threads, fine wires. Easy threading of current material.
Small and handy, always ready, suitable for short-time measurements.
Direct reading of measured tensile force. Display damping can be activated, stable and smooth display even during fluctuating tensile forces. At the push of a button the last indicated measured value will be held.

Nominal loads:
100cN, 200cN, 300cN

Measuring ranges:
0-100cN, 0-200cN or 0-300cN

Safe-keeping of HANDY-TENS in leather sheath.

Battery operated.

Available accessories:
storage battery and charger

Option: Peak indication

 

Data sheet:

Datasheet_HANDY-TENS (Download)


HANDY-TENS VK

Electronic tensile force measuring device with large measuring range. Can be equipped with rollers for measuring wires or textile materials.

Easy threading of material by adjusting mechanism.

2 measuring ranges available.

Handy-Tens VK:

Nominal loads: 20N
Measuring ranges: 0 - 2000cN
Resolution: 1cN-steps

 

Handy-Tens VK2:

Nominal loads: 80N
Measuring ranges: 0 - 80,0N
Resolution: 0,1N steps
Analog output signal 0 - 1 V

Safe-keeping of HANDY-TENS in leather sheath.

Battery operated.

Available accessories:
storage battery and charger

Option: Peak indication

 

Data sheet:

Datasheet HANDY-TENS VK (Download)


HANDY-TENS LC

Electronic tensile force measuring device for measuring thin wires, strands and textile materials. Equipped with rollers of 10 mm (or 11 mm zylindrical roller 5 to 45 mm wide) diameter, also suitable for measuring fiber optic cable. Direct reading of measured tensile force. Display damping can be activated, i.e. stable and smooth display even during fluctuating tensile forces. At the push of a button the last indicated measuring value will be held.

Nominal loads: 20N, 100N
Measuring ranges:
0-2000cN, 0-10daN
Analog output signal 0 - 1 V

Safe-keeping of HANDY-TENS in leather sheath.

Battery operated.

Available accessories:
storage battery and charger

Option: Peak indication

 

Data sheet:

Datasheet HANDY-TENS LC (Download)


HANDY-TENS LWL

Electronic tensile force measuring device. Equipped with rollers of 50 mm diameter and therefore suitable for measuring fiber optic cable. Least deflection of material to be measured. Direct reading of measured tensile force. Display damping can be activated, i.e. stable and smooth indication even during fluctuating tensile forces. At the push of a button the last indicated measured value will be held.

Nominal load: 20N (2000cN)
Solution: 0,01N (1cN) steps
Measuring range: 0-20N, 0-100N

Battery operated

Available accessories:
Storage battery and charger

Option: Peak indication

 

Data sheet:

Datasheet HANDY-TENS LWL (Download)


Combi 490

Robust electronic tensile force measuring device with built-in sensor type M 156. Least deflection, 6° only.
For measuring: Wires, strands and textile materials. Easy threading by transposition of guiding rollers. 3 material guides are possible. Direct reading of measured tensile force. Display damping can be activated, stable and smooth display even during fluctuating tensile forces. At the push of a button the last indicated measured value will be held.

Nominal loads: 50N - 1 kN

The measuring range is
depending on the built-in
sensor. Tensile forces up to
100 daN can be measured.

Analog output signal 0 - 1 V

Battery operated

Available accessories:
storage battery and charger

Option: Peak indication

 

Data sheet:

Datasheet Combi 490 (Download)


Combi M600

Electronic tensionmeter, battery-operated, for short-time measurement, one - hand - operation, direct reading of measured value on the digital display.
Easy threading into material. Measurement of pretensioned cables.

Tension measurement on guy ropes and similar applications, up to a diameter of 18 mm.


Specifics: The measured cable is fixed with two clamps on the cable guides and the measured value can then be read, independently of the diameter, on the digital display.

Nominal loads: 50,0N, 100,0N, 199,9N, 300N, 500N 1000N and 1999N

Guides spacing: X = 180mm for measuring wires, up to 480 mm for measuring cables; can be customized according to measuring task.

Meas. error: Error of integrated measuring system: <0,5 %

Output signal: Analogue output signal 0 to +1V

Housing: Material aluminium alloy

Weight: Ca. 600 grams up to ca. 1000 grams according to design.

Data sheet:

Datasheet Combi M600 (Download)


tensile force display
DMS-TENS

Small portable electronic force ldisplay device, battery operated. For connecting our sensors with type designations M 11xx, LCxx, STAK11xx.

Direct reading of measured values.

Stable and smooth display by effective damping.

Strong aluminium housing.

Measuring range: Determined by connected sensor

Max. display: 0 - 1999

Option: Peak indication

 

Data sheet:

Datasheet DMS TENS (Download)


tensile force display
MINI 710

Small smart portable electronic tensile force display device, for connecting capacitive Tensometric tensile force sensors.
Digital display: direct reading of measured tensile force.

At the push of a button the last indicated measuring value is held.

Analog output signal: 0 - 1 V

Battery operated

Available accessories:
Storage battery and charger.

 

Data sheet:

Datasheet Mini 710-D (Download)


tensile force display
KT871

The KT 871-PAX is a high precise digital tensile force programmable indicating instrument.

It is optimal suited for direct connection of Tensometric tensile force sensors:
- with integrated amplifier (Series 3xx and 13xx, service voltage 24V)
- with strain gage measuring bridge (Series 11xx).

The operating mode can be selected by switch.

 

Data sheet:

Datasheet KT871-PAX (Download)


M124

Series M 124 and M 134 are compact sensors for measuring tensile forces.

By means of its smooth and precise ball-bearings as well very less tension on elastic yarn can be measured. Easy threading of the material, turn the sensor. By means of the outer precise guide-rollers, the material is guided in a defined angle around the measuring-roller.

Due to the deviation - the resulting radialforce - is measured by the sensor. It is proportional to the tensile force.

 

Nominal loads: M 124: 5 dN (50cN), 1 N, 2 N, 3 N, 5N

Measuring principle: capacitive
the sensor transforms the, on the measuring-roller active radial force, into a porportional electric outputsignal.
Roller material: AlCuMgPb
Material speed: up to 2000 m/min.
Option: ceramic coated roller, built-in amplifier

 

Accessories: connection cable, amplifier - with or without display

 

Data sheet:

Datasheet M124 (Download)


M134

Series M 124 and M 134 are compact sensors for measuring tensile forces. By means of its smooth and precise ball-bearings as well very less tension on elastic yarn can be measured. Easy threading of the material, turn the sensor. By means of the outer precise guide-rollers, the material is guided in a defined angle around the measuring-roller.

Due to the deviation - the resulting radialforce - is measured by the sensor. It is proportional to the tensile force.

 

Nominal loads: M 134: 5 N, 1 daN, 2 daN, 3 daN, 4 daN

Measuring principle: capacitive
the sensor transforms the, on the measuring-roller active radial force, into a porportional electric outputsignal.
Roller material: AlCuMgPb
Material speed: up to 2000 m/min.
Option: ceramic coated roller, built-in amplifier

 

Accessories: connection cable, amplifier - with or without display

 

Data sheet:

Datasheet M134 (Download)


M150

Head series M 150 is a compact system to measure tensile forces on : cables, belts, profiles, tapes etc.
The smooth, in precise ball-bearing running rollers, can be adjusted to the material, which should be measured.
It is not necessary to thread the material. Press the measuring head only light against the material you like to measure.
Both the outer guide-rollers guide the material in a defined angle over the measuring roller.

Due to the deviation, the resulting radial force is measured by the head. It is proportional to the tensile force.

 

Nominal loads: 5 daN, 10 daN, 3 hN, 5 hN, 1 kN, 2 kN, 3 kN

Measuring principle: measuring system = capacitive

Optional : distance between the outer guide-rollers of 180 mm, 280 mm or 380 mm are as well available

Option: cylindrical rollers, ceramic coated rollers

Accessories available: connection cable, amplifier with or without display

 

Data sheet:

Datasheet M150 (Download)


M156

Head series M 156 is a compact system to measure tensile forces on: cables, stranded-wire, wires, tapes etc.

The smooth, in ball-bearing running rollers, can be adjusted to the material, which should be measured. By means of a light turn, the measuring head can easy be threaded in the running material too. Both the outer guide-rollers guide the material in a defined angle over the measuring roller. Due to the deviation, the resulting radial force is measured by the head. It is proportional to the tensile force.

 

Nominal loads: 5 daN, 10 daN, 2 hN, 5 hN, 1 kN

Measuring principle: measuring system = capacitive

Optional : distance between both the outer guide-rollers : 280 mm ( for stiff material )

Option: cylindrical rollers, ceramic coated rollers

Accessories available: connection cable, amplifier with or without display

 

Data sheet:

Datasheet M156 (Download)


warp tension measuring
KETT 03

The compact KETT03 tensionmeter has been developed for measuring the tension forces of warp threads. A special mechanism enables the threading of warp threads, even when threads are close together. The total force of a warp up to a maximum width of 50 mm is measured and indicated on a separate gauge. The streight design of the unit allows the measurement of tensions even at the edges of the warp.The unit is versatile, measurements of the running warp may be taken vertically or horizontally.

Data sheet:

Datasheet KETT 03 (Download)


warp tension measuring
KETT 08

The compact Kett-08 tensionmeter has been developed for measuring tensile forces of warp threads. The total of the forces of a warp of 20mm in width is measured and indicated on a separate display instrument. The slim design permits measurements at the edges of the warp. The measuring position is optional, measurements can be made at horizontally as well as vertically running warps.

Nominal loads: 1999cN, 30,0N with 20mm measuring width.

 

Data sheet:

Datasheet KETT 08 (Download)


for minimum forces

M 120, M 130 capacitive measuring system

Sensor for measuring very small thread tensions resp. tensile forces within the centiNewton range. With ceramic material guides, for measuring of high-speed materials - or with ball-bearing material guides for avoiding additional friction. A relocatable attachment facilitates catching the material to be measured.

Available with integrated measuring amplifier or with connection plug for Tensometric display devices.

 

Measuring ranges:
0-10cN, 0-20cN, 0-30cN,
0-50cN, 0-100cN,

0-200cN, 0-300cN With guiding rollers type:
M120With fixed ceramic guides type: M130

For connecting the display devices MINI 710 and KT871

Integrated measuring amplifier
is possible.

 

Data sheet:

Datasheet M120 (Download)


M1356-LC

The head series M 1356-LC is a compact system to measure tensile forces on :
cables, stranded-wire, wires, tapes etc.

The smooth, in ball-bearing running rollers, can be adjusted to the material, which should be measured.

By means of a light turn, the measuring head can easily be threaded in the running material too

Suitable for installation in machines, labs, or measurement by hand.

Characteristics: By changing the 2 outer guide-rollers, 3 various material guidings are possible.

Nominal loads: 5 daN, 10 daN, 2 hN, 5 hN, further ones on request

 

Data sheet:

Data sheet M1356-LC (Download)


measuring sheets

M 160-1 for machine clothing

Tensile force measuring oft horizontally or vertically running sheets. For measuring machine clothing and dryer fabrics. The sensor is cable connected with the display device. The value daN/cm sheet width is shown.

 

Measuring ranges:
0-2daN/cm, 0-5daN/cm,
0-10daN/cm, 0-20daN/cm
Measuring roller width: 25mm
Guide roller width: 300mm

 

Data sheet:

Datasheet M160 (Download)


measuring sheets

M 161

The measuring unit M161 has been developed for measuring tensile forces of belts and webs.By special arrangement of the guide rollers and measuring roller the sensor is only lightly pressed against the web.

 

Measuring ranges: From 0 – 10 daN to 0 - 500 daN available

Measuring widths: 7 versions from 0 – 50 mm to 0 – 400 mm available.

 

Data sheet:

Data sheet M161 (Download)